1. Suitable for TP and OCA coating
2. Suitable for product size: 7.0 ~ 15.6//
TP：MAX：376*260mm，MIN：210*110mm
OCA：MAX：346*248mm MIN：175*100mm
FPC：MAX：30*30mm
3. Suitable for fitting TP and LCM; LCM can be fitted with or without backlight
4. Suitable product size: 7.0 ~ 15.6//
TP:MAX 376*260 mm， MIN： 210*110 mm
LCM:MAX 346*248 mm， MIN：175*100 mm
FPC:MAX 150*100 mm
1. High precision alignment and fitting system, adopting 1.3 million 4ccd alignment system combined with four axis precision slide;
2. The line body can connect the front and rear equipment of the customer;
3. TP manual feeding is bonded with OCA hard board. OCA adopts automatic feeding and automatic tearing of light centrifugal film. The module is gripped and corrected by the feeding robot on the assembly line. It adopts the automatic film tearing method and has the function of checking the film tearing condition. If the module fails to tear the film, it will be automatically discharged. The centrifugal film with TP tear weight is the lower tear film. If the tear film fails, it will be discharged automatically. The success rate of film tearing is high and the product is not damaged;
4. Equipped with Panasonic PLC and vinylon touch screen system, the operation interface is in Chinese, with user password protection function;
5. The main accessories are imported from Japan, effectively ensuring the stability of the equipment;
6. The parameters are input and saved by the touch screen to facilitate debugging. The equipment has sound and light alarm function;
7. The whole equipment adopts high rigid structure to improve the overall stability of the equipment;
8. The image photographing system uses the infrared light source to irradiate the pixel points of the module, which can eliminate the peeling and cutting error.
